221 N Hogan St,

Jacksonville, FL 32202

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

221 N Hogan St,

Jacksonville, FL 32202

Replacing a Hot Water Heater? Learn the Best Time

When to replace the Hot water heater in your residential property?

It might be time to replace it if your water heating unit is more than 10 years old. When looking for a new water heater, keep these energy-efficient options in mind.

 

A hot water heater’s tank ought to last 6 to twelve years with better upkeep, nevertheless, tankless water heaters can last up to twenty years.

 

For the most current due dates, you ought to consult your guarantee.

So, how can you tell when it’s time to change your water heater? A hot water heater that is frequently maintained and repaired as needed can last for a lot of years. You‘ve most likely been utilizing the same water heater since you moved into your current residential property.

All better things must definitely reach an end, and you will require to replace the water heater at some time in the future when it can no longer do its job.

 

You might at first consider having the water heater repaired, but there are signals to look for that will help you determine whether to replace the warm water heating unit in your residential property.

Here are 5 symptoms it’s time to replace your water heater:

None of these symptoms are a sure indicator that it’s time to replace the hot water heater. Prior to making a selection, always speak with an experienced plumbing contractor. The plumbing service can advise you if the repair work are still worthwhile.

Age

In a common residential property, how long do water heaters last? Many systems have a life expectancy of 15 to twenty years. Although the current water heater remains in good working order, it is generally best to set up a new system if it is more than twenty years old.

 

A drop due to age will take place quickly, and it is wise to get ahead of it by buying a new water heater.

The amount of hot water lost

A low amount of hot water is another clear hint that it is time to replace your hot water heater. These are symptoms that your water heater is on its last leg and should be replaced.

Decay

You should not detect decay on your water heater till it’s rather old. If it does take place, it is generally permanent, and you will have to replace your water heater.

Water reddish discoloration

This suggests that the interior of the hot water heater tank is rusting if you turn on the taps and see a reddish tint to the hot water.

Regular repair work

When it is time to replace it, keeping track of the total number of times a hot water heating unit requires to be fixed in a year is a great way to determine.

Your residential property’s water heater should only require to be serviced twice a year.

Some jobs are better left to the pros...

Consult a Pro. Get No-Commitment Estimates For Your Project.

Electric vs. Gas Water Heaters: How To Pick?

Find out about the rewards and drawbacks of each fuel source, as well as more recent, more efficient designs of water heaters that might conserve you money in the long run.

 

If you‘ve had the same warm water heating unit for more than 10 years– the average lifespan– a great suggestion would be to consider changing it before it breaks down and puts you in a mess.

 

Nevertheless, before you start shopping for a new hot water heater, you need to first choose whether it should be gas or electrical. While both types are very quite similar, there are significant distinctions in regards to functions and performances in between the two.

The option amongst gas and electrical water generally boils down to the kind of power currently present in the residential property.

Many times, property owners simply go with whatever the residential property already has. Practically every residential property has electrical energy, and plenty of have both gas and electrical energy.

 

If you simply have electrical energy, the choice is basic: You require to select an electric powered water heater.

 

Electrically powered warm water heating systems might not be the only choice for rural locals who do not have access to gas. They can utilize a gas water heater if they have propane.

 

Both gas and electrical water heaters are graded by “input,” which is a measurement of just how much gas or electrical energy is utilized each hour to heat up the water in the tank.

 

BTUs are utilized to measure gas input, while watts are utilized to measure electrical input.

Electric Gas Water Heater
  • A gas hot water heater’s average input ranking varies from approximately 30,000 to 180,000 BTUs, depending on size. The greater the BTU ranking, the much faster the device will heat up water.

  • The power input of electrical water heaters varies from around 1,440 to 5,500 watts, and the same concept applies– the greater the wattage, the much faster the device will heat up water.

Gas water heaters have greater starting costs than similar electric powered water heaters, but they can also be cheaper to operate.

The price of a water heater differs mainly dependent on how big, energy efficient, and high quality your hot water heater is. Normally, the greater the price, the better the machine will execute. A gas warm water heating unit, on the other hand, will cost more upfront than a comparable-size electric powered warm water heating unit.

 

On the other hand, it is generally cheaper to operate a gas hot water heater since the cost of gas is lower in many places of the nation than the cost of electrical energy.

 

Depending upon where you are, you might choose one over the other. Your regular monthly bills are what will impact you in the long run.

 

While the cost of a water heater is crucial, it should not be your only deciding aspect. Your choice should take into consideration the cost of efficiency, operation, and performance.

Electric powered water heaters (especially electric powered heat pump water heaters) can have EF ratings that are higher than gas water heaters.

The energy factor (EF) of a gas or electric powered hot water heater is a measurement that compares the volume of warm water produced daily to the volume of fuel used up.

 

The more dependable the water heater, the greater the EF value. While the efficiency of gas and electric powered designs is generally similar, particularly when comparing designs of the same producer and size, specific types of electric-powered designs– consisting of heat pump and hybrid heat pump units, as gone over below– have the efficiency edge.

 

The EF ranking of a water heater can be found on the product’s box or in the literature that features it. Every brand-new traditional water heater need to have a colorful yellow and black Energy Guide label that reveals the product’s energy factor as well as the following information:

 

  • The kind of fuel the water heater uses.
  • Its expected annual operating cost.
  • The expected volume of energy utilized annual (BTUs or watts).
  • An Energy Star logo (if the water heater fulfills Energy Star requirements for water heaters).
  • Tank size (in gallons).
  • First-hour ranking (see listed below).

 

You won’t have the ability to see the Energy Guide label if you shop online, but trustworthy vendors provide all technical requirements about the designs they sell, so you’ll have all the details you require to make an informed choice.

Certain types of gas and electrical water heaters are more energy efficient by design.

Neither fuel type guarantees the highest efficiency; nevertheless, suppliers have developed incredibly energy efficient subcategories of water heaters for each kind of source of power.

Efficient Gas Water Heaters

Energy Efficient Gas Water Heaters

Condensing water heaters recirculate and capture energy that would otherwise be wasted in order to improve the overall efficiency of the unit.

 

Condensing units capture and recycle hot water vapor, unlike common (non-condensing) gas hot water heaters, which route hot water vapor down a flue and exhaust it out of the house.

 

Naturally, these systems have downsides and advantages:

 

  • Condensing water heaters are more costly than similar non-condensing systems.
  • Running expenses are lower for condensing hot water heaters.
  • Condensing water heaters have greater first-hour ratings and recovery rates than non-condensing models.
  • An installed gas line is required.
High Efficiency Condensing Water Heaters

Energy Efficient Electrically Powered Water Heaters

The heatpump hot water heater is the peak of efficiency in electric powered hot water heaters. Due to the fact that it draws heat from the air, this water heater is most fit for usage in warm areas.

 

Heatpump models are more costly than non-heat pump ones (about $800 to $2,500 more than a general electric powered model), but they are the most energy efficient water heaters on the marketplace today.

 

Hybrid heatpump water heaters allow the customer to select several working modes for different circumstances, therefore increasing the product’s efficiency.

 

Many hybrid heat pump systems, for example, provide a “vacation” mode that lowers operating expenses while no one is at home.

 

Depending upon the model, choosing a hybrid heat pump over a normal water heater can conserve you up to 80% on hot water bills. These appliances, nevertheless, need to be set up in an area of at least 1,000 square feet, so while they are well-suited for a large garage, they are not well-suited for a small utility storage room.

Tankless Water Heaters

Efficient Water Heaters Powered by Gas or Electrical power

Tankless water heaters, frequently called “on-demand” or “point-of-use (POU)” hot water heaters, are available in both gas and electrical designs. When an appliance or a faucet is switched on, these smaller setups suck water in through a heating element.

 

They can be up to 35% more energy efficient than basic tank-type water heaters since they heat up water as you utilize it. Condensing or non-condensing gas tankless hot water heaters are available.

 

They have a limitation on just how much warm water can be pumped out at once, so select the device based on just how much warm water you’ll require. Due to the fact that they do not hold warm water, recovery and first-hour ratings do not apply (see listed below).

 

Instead, tankless water heaters are sized based on their “circulation rate,” which is determined in gallons per minute (GPM).

Gas hot water heaters tend to warm up faster.

Because of its combustion, gas produces heat much faster than an electrical heating element. As a result, the recovery rate and first-hour ranking (FHR) of gas water heaters are higher than those of comparable electrical systems with the same producer and tank size.

(You can locate these ratings on the system’s description on the retailer’s or producer’s site).

  • The quantity of water that the system can heat up an additional 90 degrees Fahrenheit over time is indicated by the recovery rate, which is determined in gallons per hour (GPH)
  • When the water in the tank is fully heated, the FHR shows how much hot water the heating unit can give up the first hour. The greater the FHR, the more energy efficient the water heater.

An electrical water heater installation could be a DIY project.

A determined do-it-yourselfer with fundamental electrical expertise can generally replace an electrical hot water heater and conserve installation expenses (about $350 to $450, depending on the area areas of the nation will have varying rates).

Replacing a gas hot water heater, which requires reconnecting a gas and removing line, is an entirely separate procedure. Gas lines need to be moved throughout installation, and gas and propane water heaters (other than condensing types) need to be vented to the exterior.

This is not a task that the average homeowner has the ability to do; rather, it is advised that the installation be managed by an expert.

 

If a home currently has a gas water heater, a plumber will charge $400 to $550 to remove the old system and set up the brand-new one, regardless of whether it is a tank or tankless design. Nevertheless, switching from electrical to gas may cost an additional $1,500 to $2,300 in installation expenses due to the requirement to run a new gas line and set up venting.

 

The kind of water heater (tank or tankless, for example), instead of the source of power, will choose for how long it lasts.

 

Tank water heaters last 10 to 13 years on average for both gas and electrical, whereas tankless units can live up to twenty years or more. Electric heat pump hot water heaters have a life expectancy of 12 to 15 years on average.

 

Whatever kind of water heater you select, whether gas or electrical, you will get the most beneficial life out of it if you always follow the producer’s annual service and upkeep schedule.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project

Proud to Install, Repair, and Service the Following Brands: