221 N Hogan St,

Jacksonville, FL 32202

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

221 N Hogan St,

Jacksonville, FL 32202

Clogged up Sink? 6 Simple Methods To Help

With a few household products and these basic steps, you can learn just how to unclog a sink and spare yourself a call to a plumber.

Blocked home kitchen sinks are among the most typical drain issues that homeowners deal with. Fortunately, clogged drains are as well just one of the simplest house repairs to perform on your own.

When it comes to the kitchen sink, do not feel Drano or other chemical-based drain cleaners are the quick remedies. Although the blockage seems cleared, the chemicals can sometimes do more damage to your system.

Don’t feel of calling the plumbing service just yet! There’s a great chance you can fix the problem yourself with just one of these six kitchen sink unclogging techniques:

1. Attack with boiling water

When hair, grease, soap residue, and other dirt become blocked in your drain, boiling water may be all that is needed to clear the obstruction. It’s the easiest option, therefore it should be your first choice when attempting to unblock a sink.

Here are the actions to take, which are as basic as 1-2-3:

  • Bring half a gallon of water to a boil on the stove, or heat the water in a kettle.
  • Boiling water should be poured instantly into the drain hole
  • Switch on the faucet and examine to see if the water drains efficiently. Repeat the method if it is still emptying slowly or standing still in the sink.


Crucial: Do not try this method if your drain is linked to PVC pipes, as the boiling water may damage the plastic or melt.

If the boiling water fails to clear the obstruction on the 2nd try, it’s time to attempt another method. Unfortunately, you have a sink obstruction that is hard to the basic boiling water option.

Some jobs are better left to the pros...

Sink still not draining? Get No-Commitment Estimates!

2. Examine the garbage disposal

If you have a garbage disposal in your sink, it could be the source of your drain problems. Turning it on will generally break it apart if the obstruction is in the trash disposal.


Overheated or faulty disposals may not even turn on, however you may quickly reboot them by pushing the reset button on the side or bottom of the device. After resetting the disposal, restart it to clear the obstruction.


When you turn on the disposal, you may hear a low humming noise, which indicates that the device is jammed or malfunctioning. Before trying to repair your disposal, remember to turn off the electrical power and never– and we mean never– place your hand in the disposal.


You can then try to separate the obstruction in the disposal by manually turning the blades. Place an Allen wrench into the opening on the bottom of the disposal and twist up until you feel less resistance, showing that the obstruction is breaking apart.

3. Plunge away the obstruction

When you have actually confirmed that the waste disposal unit isn’t the concern, it’s time to take out the plunger. But remember that, while you can utilize a toilet plunger if that’s all you have, Expert Plumbers advise utilizing a flat-bottomed one for the job.

With the plunger in hand, follow the following jobs:

  • Fill the sink with boiling water up until it’s halfway full, forming a seal around the drain.
  • Place the plunger over the drain and quickly pump up and down a number of times.
  • Remove the plunger and see whether or not the water drains.
  • Repeat this step up until the water drains freely.


If the sink is still not emptying appropriately after multiple plunging efforts, you know what to do. It’s time to attempt our next method.

4. Break it down with baking soda and vinegar

This method is a more natural option to utilizing chemical drain cleaners in order to unclog drains. Baking soda and vinegar are extra normal house products that you are most likely to have in your kitchen.

In order to permit the mix to perform its magic, follow these procedures:

  • Using a cup or bowl, remove any standing water from the sink.
  • Pour one cup of baking soda down the drain, pushing the powder down with a spatula or spoon if needed.
  • 1 cup of white vinegar should be poured down the drain.
  • Seal the drain opening with a stopper or cover.
  • Enable the mix to rest for 15 minutes.
  • Take off the cap and flush the drain with hot water.


This natural approach, like any other unclogging method, does not ensure success. If, after completing the actions, it appears like you are making progress on the obstruction, repeat the actions.

5. Attempt the plumber’s snake

Blockages that fight back will need the use of a plumber’s snake to clear the obstruction. The tool has a spiral snake that is coiled and reaches down into the drain. When the snake enters into contact with a clog, crank the handle to break the garbage and draw it out of the drain.


Electric snakes have even more significant power to unclog drains.


You can make one out of a wire coat hanger if you do not have a plumber’s snake. Simply unwind the hanger into a long strand of wire with a pair of needle-nose pliers.


Keep the hooked end because it will be utilized to grab onto the debris. If needed, utilize the pliers to customize the hook’s angle so that it fits quickly into the drain opening.


Whatever tool you’re utilizing, simply feed it a few feet at a time down the drain. You may inadvertently press the obstruction further down the pipeline if you press too hard.


When the tip of your tool enters into contact with a blockage, hook it on and drag the debris up into the drain.

Local Plumber-Sink P-Trap Diagram Plumbing

6. Clean the P-trap

If the water still does not drain efficiently, there could be a blockage in the P-trap, which is the elbow-shaped pipeline under your sink. Food, grease, and other build up may become stuck in the pipeline, resulting in your sink to drain slowly or not at all as the water meets a snag on its way down.


The idea is to take off the pipeline and clear away the garbage that is clogging it. Warning: This job can get a little messy, so arm yourself with gloves, safety glasses, and towels.

When you’re ready, clear the P-trap as follows:

  • Put a bucket under the pipeline. When the P-trap is opened, this will gather any backed-up water or dirt that may fall out.
  • Loosen the trap adapters that link the curved piece to the horizontal and vertical drain pipes. On either end of the P-trap, a slip nut should exist.
  • Take off the P-trap and scrub the pipeline of any gunk, dirt, or residue.
  • Reattach the trap. Switch on the faucet to clear the drain.


The block might be further up the pipeline if the drain concern continues to be bad. You go back under the sink to locate the source of the obstruction.

Here’s what you may need to do:

  • Repeat the procedure that takes off the P-trap.


  • The horizontal pipeline that links the system to the wall should be removed.


  • Go into the wall pipeline with a plumber’s snake, auger, or coat hanger. Utilize your tool to remove it from the pipeline when you discover a clog.


  • Repeat the procedure up until all build up has been taken off.


  • Reassemble the pipes and P-trap by hand tightening the adapters. (A note of attention: Do not over tighten, as this may trigger the adapters to crack).


  • Flush the drain with boiling water.


  • Examine under the sink while the water is running to be sure there isn’t any leaking from the pipes even before you rejoice in your success.


Verify that all adapters are safely linked if you do see leaks. When you’re without the drips, simply dry any water spilled from under the sink or on the flooring, and you’re ready to go.

There might be a much larger problem at hand if you have actually gotten this far and your sink is still not draining. It’s time to quit and schedule an appointment with a plumber for a skilled repair work.

How to prevent future obstructions

Now that your kitchen sink is draining appropriately again, ensure you’re acting to lower future obstructions. The most important preventative measure is to prevent flushing damaging items down the drain.

This consists of the following:

  • Grease, fats, and oils
  • Meats
  • Coffee grounds
  • Eggshells
  • Starchy foods, such as bread, pasta, or rice
  • Fruit peels, pits
  • Gum
  • Paint
  • Paper products, such as paper towels or food wrappers


Rather, apply frying oil into an old can and toss it after it’s full. Certain waste, such as coffee grounds, can be put into mulch or natural waste.


Plumbers also encourages that homeowners not overload their garbage disposal. Avoid grinding more than one cup of food waste at a time, and, obviously, prevent disposing of any of the above products.


Another excellent maintenance tip is to make an equal mix of vinegar and water and freeze it in an ice tray.


Grind a handful of the cubes down your garbage disposal once a month to scrape away food waste and keep the system clean.


Running boiling water down the drain after each sink usage is another smart practice for the advantage of your pipes. You should also utilize a drain cover to trap particles before it triggers harm to the pipelines.


While clogged drains are an easy DIY task, being gotten ready for significant plumbing system concerns before they occur is often a wise strategy.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project

Proud to Install, Repair, and Service the Following Brands: